YAMAHA RHINO 700 fi ENGINE PERFORMANCE KITS
(STOCK = 25 HORSEPOWER ON OUR DYNO)
|
RHINO 700 FI BOLT ON INTAKE, EXHAUST, FUEL / IGNITION KIT 35+ HORSEPOWER
$1470.00 - MSD CONTROLLER - WELLER RACING MAPPING - MUZZY'S DUAL EXHAUST - AFE INTAKE
|
||
|
RHINO 700 FI STAGE 3 700 TOP END KIT 40+ HORSEPOWER PUMP GAS
$2500.00
- FORGED 102mm 11:1 COMP PISTON - COMETIC TOP END GASKET KIT - WELLER RACING CAMSHAFT - HEAD STUD KIT - VALVE SPRINGS TI RETAINERS - VALVE SEALS - NGK SPARK PLUG - OIL FILTER - ENGINE ICE x 2 - LABOR FOR JOB - DYNO TUNE - PORTING & POLISHING - +1 VALVES |
RHINO 700 FI STAGE 4 734 TOP END KIT 45+ HORSEPOWER PUMP GAS
$3400.00
- FORGED 105.5 11:1 COMP PISTON - COMETIC TOP END GASKET KIT - WELLER RACING CAMSHAFT - HEAD STUD KIT - VALVE SPRINGS TI RETAINERS - VALVE SEALS - NGK SPARK PLUG - OIL FILTER - ENGINE ICE x 2 - LABOR FOR JOB - DYNO TUNE - PORTING & POLISHING - +1 VALVES
- 105.5mm CYLINDER |
RHINO 700 FI 800 STROKER KIT "RACE" 55+ HORSEPOWER RACE GAS
$5000.00
- FORGED 105mm 12:1 COMP PISTON - COMETIC TOP END GASKET KIT - WELLER RACING CAMSHAFT - HEAD STUD KIT - VALVE SPRINGS TI RETAINERS - VALVE SEALS - NGK SPARK PLUG - OIL FILTER - ENGINE ICE x 2 - LABOR FOR JOB - DYNO TUNE - PORTING & POLISHING (CUSTOM) - VALVES (CUSTOM) - INJECTOR - CRANKSHAFT REBUILD - CRANKSHAFT BALANCE - CRANKSHAFT STROKE 92mm - CRANKSHAFT BEARINGS / PIN - CRANKSHAFT KEY MAG - WELLER RACING DIFF PLATE - SLEEVE CYLINDER
|
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 STAGE 1 KIT Piston kit, gasket kit, head stud kit 11:1 compression |
 |
$420.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 STAGE 2 734 KIT Piston kit, gasket kit, head stud kit, 105.5 cylinder (No core necessary. New cylinder) 10.75:1 compression |
 |
$1030.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 STAGE 3 700 KIT Piston kit, gasket kit, head stud kit, camshaft, porting & polishing, +1 valves, NGK spark plug, oil filter (Cylinder head core charge) 11:1 compression |
 |
$1600.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 STAGE 4 734 KIT Piston kit, gasket kit, head stud kit, camshaft, porting & polishing, +1 valves, NGK spark plug, oil filter, 105.5 cylinder, injector (No cylinder core necessary. New cylinder - head core charge) 10.75:1 compression |
 |
$2500.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 +1 VALVES AND SPRING KIT +1 intake and exhaust valves, dual valve springs w/ ti retainers |
 |
$405.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 HEAD STUD KIT Chromoly replacement cylinder head studs. Replace the stock bolts and allow for a tighter torque and a deeper grip. 45 ft/lbs |
|
$130.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 CYLINDER STUD KIT Chromoly replacement cylinder studs. Replace the stock bolts and allow for a tighter torque and a deeper grip. 45 ft/lbs |
|
$85.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 CYLINDER STUD KIT +1/2" Chromoly replacement cylinder studs. Replace the stock bolts and allow for a tighter torque and a deeper grip. Made for a 1/2" spacer plate. 45 ft/lbs |
|
$85.00 |
|
RHINO 700 fi DIFF PLATE Replaces the stock cast plate. Aggressive driving or racing will break the oem plate and usually breaks the cases. Don't let this happen to you. |
|
$250.00 |
|
RHINO 700 fi BILLET 54mm THROTTLE BODY Add power to your rhino 700fi. Stock throttle cable will work. Removes the idle air valve, and need to run aftermarket filter clamped on throttle body. Added 5hp to our race rhino!
|
 |
$600.00 |
|
RHINO 700 fi INTERNAL DRIVE SHAFT We have already sold 40+ of these shafts. The original one will leave you stranded if you are an aggressive driver... You can replace this with the engine in.
|
 |
$420.00 |
|
RHINO 700 fi REVERSE GEAR UPGRADE
This is a upgrade from the
original set up. The new kit has a roller bearing and a collar.
Upgrade this gear when the engine cases are apart.... Save the
money in the long run. |
 |
$69.36 |
|
RHINO 700 fi HIGH FLOW INJECTOR Adds 20% more flow than the oem injector |
 |
$185.00 |
|
RHINO 700 fi MSD IGNITION CONTROLLER Adjustable fuel mapping, ignition timing, and rev limit. Best controller on the market! |
 |
$355.00 |
|
RHINO 700 fi K&N INTAKE KIT Huge performance over stock! - Removes the stock air box.
+ 3hp |
 |
$350.00 |
|
RHINO 700 fi AFE INTAKE KIT Huge performance over stock! - Removes the stock air box.
+3hp |
|
$265.00 |
|
RHINO 700 fi CVT FILTER Keep the dirt out of your clutch |
 |
$40.00 |
|
RHINO 700 fi MUZZY'S DUAL EXHAUST |
|
$800.00 |
|
RHINO 700 fi DMC DUAL EXHAUST Huge performance over stock! 6+hp - Quieter that most exhausts out there! Used on our race rhinos. 1 year warranty
|
|
$850.00 |
|
RHINO 700 fi RADIATOR KIT WITH FAN High performance 55mm aluminum radiator, 9”fan, and custom made PWR air reed shroud (w/dual air flaps). |
|
$622.00 |
|
RHINO 700 fi OIL COOLER KIT WITH HOSES 19MM OIL COOLER (23 ROWS), that also comes with all parts needed for install (silicon hose lines, clamps, and hardware). This oil cooler has 100% more surface area for more cooling than stock. Oil temperature reduction UP TO 40 DEGREES LOWER than stock cooling. |
|
$280.00 |
|
RHINO 700 fi RACE DRY CLUTCH KIT The best bolt on for your rhino!!! Huge advantage over your buddies. Top speed and midrange |
|
$1300.00 |
| RHINO 700 fi DRY CLUTCH PULLER |
 |
$65.00 |
|
RHINO 700 fi PERFORMANCE SHEAVE Adds the top speed to your rhino |
|
$250.00 |
|
RHINO 700 fi CLUTCH SPRING Adds the mid range to your rhino |
|
$36.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 TOP END GASKET KIT
103mm 105.5mm |
|
$80.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 FORGED PISTON KIT |
|
$210.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 FORGED STROKER PISTON KIT |
|
$250.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 STROKER CRANKSHAFT 88mm PRO DOD 88mm - 2 PRO ROD 92mm PRO ROD 92mm -2 PRO ROD Balanced, welded, new bearings, new pin, key sprocket
|
|
$950.00 |
|
RHINO 700 fi, GRIZZLY 700 HOT RODS HD CRANKSHAFT BUY IT FROM US AND GET IT WELDED FOR FREE!!! |
|
$355.47 |
|
RHINO 700 fi, GRIZZLY 700 HOT RODS STROKER CRANKSHAFT (+5mm stroke) makes 727cc. Uses stock piston. Bolt in and go. BUY IT FROM US AND GET IT WELDED FOR FREE!!! |
|
$389.95 |
|
RHINO 700 fi, GRIZZLY 700 HOT RODS HD ROD KIT Huge improvement over the oem connecting rod |
|
$137.22 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 DUAL VALVE SPRING KIT WITH TI RETAINERS For correct install of larger camshafts |
|
$190.00 |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 CAMSHAFTS Many available for your application |
 |
$190.00ea |
|
RHINO 700 fi, RAPTOR 700, GRIZZLY 700 VALVES Swirl polished for optimum performance |
 |
$45.00ea |
|
RHINO 700 fi HEAVY DUTY BALL JOINT Replace your stock ball joints with these heavy duty ones! These are made in Italy and are the same ones we use for our race rhinos! |
 |
$36.75ea |
|
RHINO 700 fi NGK SPARK PLUG Replacement spark plug |
|
$4.50ea |
|
RHINO 700 fi K&N OIL FILTER (KN 204) Same filter used on all of our race rhinos! |
|
$13.95ea |
Weller Racing LLC.
Phone: 480-507-4771
Fax: 480-467-4202
305 E Comstock Dr. Suite #8
Chandler, AZ 85225
All returned parts or cancelled orders are subject to a 20% restocking fee.